VOLKSWAGEN PASSAT: 2011

All About VW Passat B3 35i

Richtige Fernseher haben Röhren!

Friday, 30 September 2011

VOLKSWAGEN PASSAT 35I MK3 YEAR 1990 STORAGE "CAPACITY" 1

SOME TELEVISION AND OTHER ELECTRONIC STUFF................LOGISTIC

Posted by FRANK at 18:00 0 comments

Email This BlogThis!Share to X Share to Facebook Share to Pinterest

Labels: 1990, CHASSIS

Newer Posts Older Posts Home

Subscribe to: Posts (Atom)

Search in This Blog

Subscribe

Posts

Atom

Posts

All Comments

Atom

All Comments

Followers

Global Total Views

Translate vw-passat-mk3-35i

Blog Archive

► 2013 (5)
- ► December (1)
- ► July (2)
- ► June (1)
- ► April (1)

► 2012 (1)
- ► January (1)

▼ 2011 (1)
- ▼ September (1)
  - VOLKSWAGEN PASSAT 35I MK3 YEAR 1990 STORAGE "CAPAC...

► 2010 (3)
- ► September (3)

Most Viewed Posts Of The Month

VOLKSWAGEN PASSAT ENGINE CONTROL MANAGEMENT DIGIFANT 2 (II).

The Bosch AFC Digifant system is a computer-controlled fuel injection system. The system does not use cold start inj...
VOLKSWAGEN PASSAT 35I MK3 ABS TEVES MARK 2 BRAKE ANTI LOCK SYSTEM DEVICE.

The ABS TEVES MARK 2 / Teves MK II brake system combines normal system operation, hydraulic power boost and anti-lock braking. The system...
VW Passat 35i mk3 Variant.

At the time it was the first Passat to be built on a Volkswagen-designed platform, rather than sharing one with an Audi saloon. The car, alt...
VOLKSWAGEN PASSAT GT G60 SYNCHRO 35I MK3 YEAR 1990.

I saw this on a local advert.............. GRABBED Immediately !!!!!!!!!!!!!!!!!!! PASSAT GT G6...
VOLKSWAGEN PASSAT 35I CHASSIS STRUCTURE VIEW.

Volkswagen B3 Passat Body Exterior Body dimensions, floor Volkswagen B3 Passat Body Exterior Body dimensions, front Volkswagen B3 Passat Bod...
VOLKSWAGEN PASSAT 35I MK3 YEAR 1990 STORAGE "CAPACITY" 4.

The car was filled with 2 heavy washing machines, and............ - GRUNDIG SUPER COLOR W6330 YEAR 1977. - REX (ZANUSSI) ...
VOLKSWAGEN PASSAT 35I MK3 YEAR 1990 STORAGE "CAPACITY" 1

SOME TELEVISION AND OTHER ELECTRONIC STUFF................LOGISTIC
VOLKSWAGEN PASSAT 35I MK3 YEAR 1990 STORAGE "CAPACITY" 2

The car was filled with a: - HEAVY OLD YEAR 1959 FRIDGE, (REX TROPICSYSTEM) - VERY HEAVY AND BIG YEAR 1962 WASHING MACHINE (CASTOR...
VOLKSWAGEN PASSAT 35I ENGINE 1.8 8 VALVE 82KW 112HPMOTOR CODE PB.

Very rare version of engine type. 1.8litre 82 KW power out. 8 Valve / 4 Cylinders. Motor Code "PB". Electronic fuel injecti...
VOLKSWAGEN PASSAT 35I MK3 YEAR 1990 STORAGE "CAPACITY" 3

The car was filled with a: SELECO (ZANUSSI) 14SC454.1 BASIC GRUNDIG XS70/1 TELEFUNKEN 2484 THOMSON 28DG17E BLACKP...

Most Popular Post of Ever

VOLKSWAGEN PASSAT ENGINE CONTROL MANAGEMENT DIGIFANT 2 (II).

The Bosch AFC Digifant system is a computer-controlled fuel injection system. The system does not use cold start inj...
VOLKSWAGEN PASSAT 35I MK3 ABS TEVES MARK 2 BRAKE ANTI LOCK SYSTEM DEVICE.

The ABS TEVES MARK 2 / Teves MK II brake system combines normal system operation, hydraulic power boost and anti-lock braking. The system...
VW Passat 35i mk3 Variant.

At the time it was the first Passat to be built on a Volkswagen-designed platform, rather than sharing one with an Audi saloon. The car, alt...
VOLKSWAGEN PASSAT 35I ENGINE 1.8 8 VALVE 82KW 112HPMOTOR CODE PB.

Very rare version of engine type. 1.8litre 82 KW power out. 8 Valve / 4 Cylinders. Motor Code "PB". Electronic fuel injecti...
VOLKSWAGEN PASSAT GT G60 SYNCHRO 35I MK3 YEAR 1990.

I saw this on a local advert.............. GRABBED Immediately !!!!!!!!!!!!!!!!!!! PASSAT GT G6...
VOLKSWAGEN PASSAT 35I CHASSIS STRUCTURE VIEW.

Volkswagen B3 Passat Body Exterior Body dimensions, floor Volkswagen B3 Passat Body Exterior Body dimensions, front Volkswagen B3 Passat Bod...
VOLKSWAGEN PASSAT 35I MK3 YEAR 1990 STORAGE "CAPACITY" 4.

The car was filled with 2 heavy washing machines, and............ - GRUNDIG SUPER COLOR W6330 YEAR 1977. - REX (ZANUSSI) ...
VOLKSWAGEN PASSAT 35I MK3 YEAR 1990 STORAGE "CAPACITY" 3

The car was filled with a: SELECO (ZANUSSI) 14SC454.1 BASIC GRUNDIG XS70/1 TELEFUNKEN 2484 THOMSON 28DG17E BLACKP...
VOLKSWAGEN PASSAT 35I MK3 YEAR 1990 STORAGE "CAPACITY" 2

The car was filled with a: - HEAVY OLD YEAR 1959 FRIDGE, (REX TROPICSYSTEM) - VERY HEAVY AND BIG YEAR 1962 WASHING MACHINE (CASTOR...
VOLKSWAGEN PASSAT 35I MK3 YEAR 1990 STORAGE "CAPACITY" 1

SOME TELEVISION AND OTHER ELECTRONIC STUFF................LOGISTIC

* * Frank Sharp Other Links * *

Obsolete Technology Tellye !
Tele Video Rama Museum !
Radio Rama Museum
Old Washing Machines Museum.
Under The Ice.

Autor Profile

FRANK: Electronic Engineer Old Technology Collector.

View my complete profile

COPYRIGHT NOTICE (C)

©2010, 2011 Frank Sharp - You do not have permission to copy photos and words from this blog, and any content may be never used it for auctions or commercial purposes, however feel free to post anything you see here with a courtesy link back, btw a link to the original post here , is mandatory.

v

w-passat-mk3-35i.blogspot.com
COPYRIGHT RULES:

1)- The contents / collections of the library or archives (http://vw-passat-mk3-35i.blogspot.com/) are open to the public therefore the reproduction or distribution should be made without any purpose of direct or indirect commercial advantage;

2)- The reproduction or distribution of the here shown http://vw-passat-mk3-35i.blogspot.com/ work have to mandatory include a notice of copyright that appears on the copy that is reproduced under the title http://vw-passat-mk3-35i.blogspot.com/ ©2010 Frank Sharp, or includes a legend stating that the work may be protected by copyright and stating the source http://vw-passat-mk3-35i.blogspot.com/ if no such notice can be found on the copy or that is reproduced under the provisions of this section.

3)- The reproduction or distribution of the here shown http://vw-passat-mk3-35i.blogspot.com/ work have to mandatory include a notice of copyright that appears on the copy that is reproduced under the title http://vw-passat-mk3-35i.blogspot.com/ ©2010 Frank Sharp in any such copy that is reproduced in digital format is not otherwise distributed in that format and is not made available to the public in that format outside the premises of the library or archives.

# This website, http://vw-passat-mk3-35i.blogspot.com/
,including all text and images not otherwise credited, is copyright © 2010 - 2014 FRANK SHARP.
# All trademarks of the apparates and their respective included patents are property of the respective owners, Dead or Alive.
# No part of this website may be reproduced in any form without prior reading and understanding above rules.
# All details are believed to be accurate, but no liability can be accepted for any errors.
# The types of equipment discussed on this website may contain high voltages and/or operate at high temperatures.
# Appropriate precautions must always be taken to minimise the risk of accidents.

All sets and apparates appearing here are property of
Engineer Frank Sharp. NOTHING HERE IS FOR SALE !

REAL CARS ARE EURO 0 !!!!!!!!!!!!!!!!!!!!

Automotive Repair Safety

SAFETY FOR AUTOMOTIVE REPAIR:
-----------------------------------------------
Doing your own auto repair work can save you money, but it can also be dirty, dangerous work.

Operating an automotive repair garage or shop can be dangerous work. Having a clear-cut and easily accessible set of policies for workplace safety can significantly cut down the risk of operating such a business.

Fire

One of the most common hazards is fire. Because of all the fumes and substances associated with an auto itself as well as fire hazards caused by the repair tools, it is important to have a fire contingency plan.

Fire Extinguisher

The very first step in developing a fire contingency plan involves getting a fire extinguisher, or several if it's a large garage. Place them somewhere very easily accessible and visible, and make sure all employees know where they are. Fire extinguishers should have ratings of "B" (grease) and "C" (electrical).

Elevating Vehicles

Always exercise caution when working on or near vehicles that have been hoisted for repair. Never crawl under a vehicle unless it has been properly and safely lifted.

Dress Code

Establish rules for employee dress. No baggy or overly loose clothing should ever be worn by those working on cars, nor should jewelry, scarves, neckties or bulky gloves. Eye protection should also be seriously considered.

Electricity

The danger of accidental electrocutions is always present, so beware of accidents involving cars' ignition electrical systems. Wear protective gear when working on engines, and make sure mechanics are aware of what is and is not dangerous.

The following tips are provided to help you avoid the dangers of auto repair so you don't injure yourself or someone else. Most of these tips are common sense warnings, but there may be some things you are not aware of that could pose a potential danger.

First and foremost, DO NOT attempt repairs that are beyond your ability. If you feel unsure about a repair, you should seek out a competent professional to do the work for you. Better to pay someone who knows what they are doing than to attempt to fix it yourself and screw it up. Many systems on vehicles today are very complex. Repairs often require considerable skill and expertise, not to mention special tools and equipment. A simple mistake could ruin sensitive (and expensive!) electronic components. So don't tackle jobs that are beyond your abilities.

Know your physical limits.

Do NOT attempt repairs yourself if you are not physically able to do the work. Replacing certain components may require heavy lifting (changing or removing tires, pulling a cylinder head, etc.), crawling under the vehicle, laying or working in an awkward position, reaching, bending, twisting, pulling, tugging, straining, jerking and motions you may not be accustomed to making. Use common sense. If you have a bad back, joint problems or lack the physical strength to do something, then DIY auto repair is not for you. Hire someone to do it for you.

Be focused.
DO NOT attempt to undertake any maintenance or repair work on your vehicle if you are tired, not feeling well, tipsy, intoxicated, on medication or otherwise impaired.

Exhaustion, illness, alcoholic beverages and even some medications may affect your judgment and perception creating a potential for injury or error. Save the beer for after the job has been completed.

GENERAL AUTO REPAIR PRECAUTIONS:

Do NOT smoke when working on any fuel related components (fuel filter, carburetor, fuel injectors, fuel pump, fuel tank or fuel lines). Better yet, do NOT smoke at all. It is bad for your health!

car on fire
Have a fire extinguisher nearby just in case. The fire extinguisher should have a "B" (liquids & grease fires) and "C" (electrical fires) rating.

battery exploded
Do NOT smoke or get any sparks near the battery. Batteries contain hydrogen gas which is very explosive. If jump starting a battery, make the final jumper connection to the engine or chassis.

NEVER crawl under an improperly supported vehicle. In other words, never trust a jack alone to hold the vehicle up. Always use a pair of support stands positioned underneath the vehicle to keep it from falling on you. Make sure the weight ratings on the support stands is more than adequate to hold up the vehicle's weight, too. Do not use blocks of wood, boxes, wheels or bricks for supports because these may slip or collapse and allow the vehicle to fall. For more information on how to safely lift and support your vehicle,

car battery . fuses
Always disconnect one of the battery cables or remove power fuses for a circuit when doing electrical repair work (as when replacing a starter, installing a radio, fixing a broken switch or wiring, etc.). This will prevent accidental shorts that could damage the wiring or start a fire. This is also a very important precaution to heed when working under the dash of any vehicle equipped with an air bag. Crossing the wrong wires might set off the air bag (which could cause injury and is very expensive to replace).

air bag
Watch Out for the Air Bags!. If working on the steering column or under the instrument panel or dash, always disconnect the battery and wait at least 15 minutes before proceeding with any disassembly or wiring tests. Crossing, jumping or shorting wires in the air bag circuit could cause the air bag(s) to accidentally deploy and possibly injure you. Air Bag wiring is often color-coded YELLOW.

car wiring
Never disconnect or unplug any electrical connector while the engine is running or the key is in the "on" position (unless you are specifically instructed to do so as part of a diagnostic procedure in a shop manual). Unplugging connectors while current is flowing through them creates a voltage spike that can damage sensitive and expensive electronic components.

alternator belt
Do not wear loose clothing, jewelry, rings, neckties, scarves or bulky gloves when working on your vehicle. If you have long hair, tie it back or cover it. These items may become entangled in pulleys or moving parts causing serious injury, dismemberment or death!
Watch out for moving parts such as drive belts, pulleys, fan and other moving parts when working under the hood if the engine is running. DO NOT lean over a mechanical cooling fan while revving the engine.

Watch out for hot stuff. If the engine is running or the vehicle has been driven within the past half hour or so, the engine, radiator, exhaust manifolds, catalytic converter, muffler and pipes will be hot.

radiator cap
NEVER open the radiator cap on a hot engine. Always allow the engine to cool for at least an hour before attempting to open the cap. Even then, use extreme caution. Place a rag over the cap, then loosen it slowly to the first detent or stop. At this point any residual pressure and steam should be released. Wait until all pressure has escaped before removing the cap the rest of the way.

Avoid electrical shocks when working around the ignition system. The normal battery voltage in passenger car and light truck electrical systems is only 12 volts and will not harm you. But the ignition system bumps the primary voltage up to 25,000 to 40,000 volts which can give you a nasty shock if you touch a spark plug wire, the ignition coil or distributor cap while the engine is running. On hybrid vehicles, the hybrid battery may contain up to 300 or more volts, which can kill or injure you. Do not touch any ORANGE high voltage cables unless the hybrid battery has first been disconnected. Also, wear Class 0 rated rubber gloves that can withstand up to 1000 volts.

Wear eye protection when working under the vehicle (to keep dirt and debris from falling into your eyes), when pounding or grinding on anything (to keep metal chips out of your eyes), when jump starting the battery (to keep acid out of your eyes should the battery explode), when working on air conditioning components (to keep refrigerant out of your eyes), and/or when doing anything that might pose a risk to your sight.

Wear ear protection when using loud pneumatic tools or when hammering, pounding, grinding, sawing, drilling, etc. Prolonged exposure to high levels of noise can cause permanent hearing loss.

dust mask
Wear breathing protection (an OSHA-approved mask, not just a cheap fiber dust mask) when spray painting or using other chemicals that give off aromatic hydrocarbons. A dust mask is recommended when grinding, sanding or sand blasting. A dust mask will NOT provide any protection against paint or chemical fumes. DO NOT use an air hose to blow brake dust off brake components. Brake dust may contain asbestos or other fibers that can cause lung disease if inhaled. Use a liquid cleaner to remove brake dust. When using aerosol products that contain VOCs or solvents (spray paint, throttle cleaner, brake cleaner, etc.), use in a well-ventilated area, avoid breathing the fumes and wear proper breathing protection. The best place to use such products is outdoors, or in a large garage with the door open, or with a ventilation fan that exchanges the dirty inside air for fresh outside air.

Do not open any brake lines or replace any components in a vehicle equipped with an "integral" ABS system (one where the master cylinder is combined with the ABS modulator, pump and pressure accumulator) without first depressurizing the system. This can usually be done by depressing the brake pedal 24 to 40 times while the key is off.

Use caution when opening any fuel lines on a fuel injected vehicle. The pressure in some systems may be as high as 80 to 90 psi when the engine is running. So do not open any fuel line while the engine is running unless your fire insurance and life insurance are both paid up. Residual fuel pressure can remain in the lines for many hours after the engine has been shut off. To minimize fuel spray, wrap a rag around the hose or line before loosening it, or relieve pressure in the line using a procedure approved by the vehicle manufacturer (refer to a shop manual for details).

WARNING: On diesel engines, the fuel pressure inside the fuel lines between the injection pump and fuel injectors is extremely high when the engine is running (500 to 5000 psi or higher depending on engine speed and type of injection system!). Never start a diesel engine with a fuel line or injector disconnected.

Minimize distractions while working on your vehicle. This includes small children, pets, friends, spouses, in-laws or others who may distract you from your work. This will go a long ways towards reducing the risk of injury and making a mistake.

Tell someone if you are going to be working on your vehicle outdoors or if you are going to be working underneath your vehicle. Hopefully, they will know how to dial 911 should the need arise.

Avoid shock hazards with extension cords & electrical tools. If you are working outdoors and using power tools, make sure the extension cord you are using is rated for outdoor use, that the extension cord and tools are properly grounded (a "ground fault interrupt" outlet is recommended), and that the cord has the proper amp rating for the tools you are using.
DO NOT use an adapter plug to convert a three-prong grounded plug into a two prong plug.

NOTICE

©2010, 2014 Frank Sharp - You do not have permission to copy photos and words from this blog, and any content may be never used it for auctions or commercial purposes, however feel free to post anything you see here with a courtesy link back, btw a link to the original post here , is mandatory.
All sets and apparates appearing here are property of
Engineer Frank Sharp. NOTHING HERE IS FOR SALE !

Information contained in this publication regarding device applications and the like is provided only for convenience, teaching, fun of the public and in the public interests with the exclusive scope to show old obsolete Technology regarding OLD CAR and related system apparates and the like and may be superseded by updates. It is the responsibility of the public / user to ensure that any application meets with specifications.

All rights are reserved by the Author, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed.

HOWEWER Exempted from this hardened legal reservation are brief unaltered excerpts and / or complete unaltered linked pages or groups of them or unaltered pictures or groups of them, in connection with public or private reviews or scholarly analysis, teaching, discussion ,journalistic relating to characteristic of journalists or journalism oriented to knowledge, or material supplied specifically for the purpose of being entered and executed on a computer system, for exclusive use by Pepople or groups of them in the public interests and/or in a comment form known in public WEB technology with the scope of: for restoring, for protecting old technology, for preserving old technology like as repairing and conserving and maintaining it and using in the exclusive convenience of public interests or groups of that. Duplication of this publication or parts thereof is permitted only under the provisions of actions for use in any fair dealing for the purposes of research or private study, or fair and polite criticism or review, for fun ,for restoring, for protecting old technology, for preserving old technology like as repairing and conserving and maintaining and using in the exclusive convenience of public interests or groups of that public.
ANY COMMERCIAL / BUSINESS USE even in the case of reprographic reproduction in accordance with the terms and licenses IS ALWAYS FORBIDDEN !
Violations are liable to prosecution under the respective Copyright Law.

The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. ANY Trademark owner is proprietary of his own rights dead or alive. While the advice and information in this blog are believed to be true and accurate at the date of publication, neither the authors nor the editors nor the publisher can accept any legal responsibility for any errors or omissions that may be made. The Author makes no warranty, express or implied, with respect to the material contained herein.

Information contained in this publication regarding device applications and the like is provided only for convenience, teaching, fun of the public and in the public interests with the exclusive scope to show old obsolete Technology regarding CAR AUTOMOBILES systems apparates and the like and may be superseded by updates. It is the responsibility of the public / user to ensure that any application meets with specifications.

FRANK SHARP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. FRANK SHARP disclaims all liability arising from this information and its use. Use of Electronic devices in life support and/or safety applications is entirely at the user’s risk, and the user agrees to defend, indemnify and hold harmless any fabricant of apparates from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any FRANK SHARP intellectual property rights and his artwork.

Information furnished is believed to be accurate and reliable. However, FRANK SHARP assumes no responsability for the
consequences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use. No license is granted by implication or otherwise under any patent or patent rights. Specifications mentioned in this publication are subject to
change without notice. This publication supersedes and replaces all information previously supplied.

The information in this Web site is subject to change without notice. The Author makes no representations or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. Further, the Author reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of the Author to notify any person of such revision or changes.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this Blog. If any part of this
Blog refers to any third party products or services it shall not be deemed a license grant by FRANK SHARP for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.

FRANK SHARP assumes NO liability for applications assistance or customer product design. FRANK SHARP does NOT warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of FRANK SHARP covering or relating to any combination, machine, or process in which such products or services might be or are used. FRANK SHARP’s publication of information regarding any third party’s products or services does NOT constitute FRANK SHARP’s approval, license, warranty or endorsement thereof. Reproduction of information in FRANK SHARP Web Museum BLOG'S or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations and notices and FULL reference of this Web BLOG Museum. Representation or reproduction of this information with alteration voids all Copyright provided for an associated FRANK SHARP writeup or artwork, is an unfair and deceptive business practice, and FRANK SHARP is NOT responsible nor liable for any such use.

All information and data contained in this Web Museum BLOG are with out any commitment, are not to be considered as an offer for conclusion of a contract nor shall they be construed as to create any liability. Any new issue of this blog invalidates previous issues. By this publication, FRANK SHARP does not assume responsibility for patent infringements or other rights of third parties which may result from its use. Reprinting is generally permitted, indicating the source. However, MY prior consent must be obtained in all cases.

ALL Semiconductors, trademarks and their logo are registered trademarks of respective owners which are owning the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
FRANK SHARP Web Museums Author reserves the right to make changes without further notice to any writeup and artwork herein.
FRANK SHARP Web Museums Author makes no warranty, representation or guarantee regarding the suitability of its writeup artwork for any particular purpose, nor does FRANK SHARP Web Museums Author assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in Semiconductors products data sheets and/or specifications can and do vary in different applications and actual performance may vary over time.
All operating parameters, including “Typicals” or "Average" must be validated for each customer application by customer’s trained technical experts.

FRANK SHARP Web Museums Author does not convey any license under its patent rights nor the rights of others even if here uncredited or appeared uncredited or from uncredited sources or partly credited and then not publicly acknowledged as having contributed to something here, especially a publication a citation or and broadcast or website and or it's contents or / and partial parts of it.

FRANK SHARP Web Museums Author writeup and artwork are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the apparatus or parts product could create a situation where personal injury or death may occur. A reader or a person or a technician which aquires and restores for users, readers, technicians or any kind of people or group of them, aquire or use apparates or devices like here published for any such unintended or unauthorized application, shall indemnify and hold customers or people and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that a fabricant od an apparatus was negligent regarding the design or manufacture of the part.
This literature is subject to all applicable copyright laws and is not for resale in any manner.

No Support Obligation: Reader/Users of this blog acknowledges and agrees that the Blog Author has no and shall have no obligation or responsibility whatsoever under this No Support Obligation to provide to Reader/Users of this blog, Readers/Users, or any third party, any maintenance, support or assistance ("Support"), including without limitation in relation to the Content, Software, Modifications or Reader/Users of this blog website, and Blog Author (and its hosting/suppliers) cannot and shall not be held liable or responsible to Reader/Users of this blog, Readers/Users, or any third party for the failure to provide any such Support.

The blog content (ALL) is provided by blog author to readers and users, for free, hereunder "as is" and without any representations or warranties whatsoever. Without limiting the foregoing, blog author (and its hosting/suppliers) hereby disclaims any and all representations and warranties in relation to the content, any modifications, or this agreement, whether express, implied, statutory or otherwise,including without limitation any and all representations and warranties of merchantability, fitness for a particular purpose, title, non-infringement, and those arising from a course of dealing, trade usage, trade custom or trade practice.

FRANK SHARP RESOURCES AND WEBLOG (BLOG) ARE PROVIDED “AS IS” AND WITH ALL FAULTS. FRANK SHARP DISCLAIMS ALL OTHER WARRANTIES OR REPRESENTATIONS, EXPRESS OR IMPLIED, REGARDING RESOURCES WEBLOG (BLOG) OR USE THEREOF, INCLUDING BUT NOT LIMITED TO ACCURACY OR COMPLETENESS, TITLE, ANY EPIDEMIC FAILURE WARRANTY AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. FRANK SHARP SHALL NOT BE LIABLE FOR AND SHALL NOT DEFEND OR INDEMNIFY DESIGNER AGAINST ANY CLAIM, INCLUDING BUT NOT LIMITED TO ANY INFRINGEMENT CLAIM THAT RELATES TO OR IS BASED ON ANY COMBINATION OF PRODUCTS EVEN IF DESCRIBED IN FRANK SHARP RESOURCES WEBLOG (BLOG) OR OTHERWISE. IN NO EVENT SHALL FRANK SHARP BE LIABLE FOR ANY ACTUAL, DIRECT, SPECIAL, COLLATERAL, INDIRECT, PUNITIVE, INCIDENTAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES IN CONNECTION WITH OR ARISING OUT OF FRANK SHARP RESOURCES WEBLOG (BLOG) OR USE THEREOF, AND REGARDLESS OF WHETHER FRANK SHARP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

The blog content and apparates here shown are NOT designed, developed, licensed or provided for use in connection with any nuclear facility, or in connection with the flight, navigation or communication of aircraft or ground support equipment, or in connection with military or medical equipment/applications or activities, or any other inherently dangerous or high risk equipment/applications or activities ("High Risk Use").

THE ELECTRONIC APPARATES PRODUCTS HERE PUBLISHED ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE
IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. THE ELECTRONIC APPARATES PRODUCTS HERE PUBLISHED MAY ONLY BE USED IN APPLICATIONS AT USER’S OWN RISK.

Powered by Blogger.